Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen der Seite angezeigt.

--- notiz:fujitsu-futro-s940 [2026/01/10 18:38] – clerie
+++ notiz:fujitsu-futro-s940 [2026/01/10 18:48] (aktuell) – clerie
@@ Zeile 7: / Zeile 7: @@
 {{notiz:fujitsu-futro-s940-rcv-jumper-positions.png?nolink&600|}}
+===== Remove BIOS Password =====
+  * unplug power
+  * open case
+  * set RCV jumper
+    * when the missing pin is at the top, bridge the two left pins with the jumper
+  * plug in power
+  * start system
+  * press F2 to get into the BIOS
+  * save BIOS settings
+  * shut down system
+  * unplug power
+  * put the RCP jumper back to its normal position
+    * when the missing pin is at the top, bridge the center and the right pins at the bottom with the jumper
+  * close case
 ===== BIOS Recovery =====
@@ Zeile 45: / Zeile 61: @@
     * first boot takes quite a long time
     * but it displays the Fujitsu logo quite early when it is plugged to a monitor, so that is a good sign
+===== BIOS Serial Console Redirect =====
+In the BIOS one can configure the BIOS to expose itself via the COM1 serial console instead of one of the Display Port outputs.
+We found out that it is not possible to boot from a USB stick while the BIOS is redirected to the serial console.